Ph-cleantec machine cleaning is based on low pressure and hot water. With the long lance it is also possible to clean at difficult to access points. The low water consumption of 1,8 l/min. ensures that the coolant balance of the machine is not affected.
Due to their functionality and flexibility ph-cleantec cleaners are “allrounders”. Their practical field of application in the car/truck workshops ranges from brake cleaning, parts and up to sectional engines and chassis cleaning. Through the electric flow heater and the integrated tank, the system can be used in any location. They are very practically ready for use immediately. In addition, ph-cleantec technology helps to protect employees and the environment, compared with other conventional methods ph-cleantec technology has the advantage of being a chemical-free cleaning method because it mainly uses hot water. If required, an alkaline cleaning agent can be added as a cleaning accelerator and/or corrosion protector. “Incidentally” the directives of the employer’s liability insurance association are complied with, legal regulations (ordinance on hazardous substances, VOC guidelines) are met and employees thus motivated. Furthermore the method is extremely economic, since constant purchasing of cleaning agents is not necessary. Fire hazardous A 1 cleaning agents as well as hydrocarbon-based detergents (solvents) pollute the environment and in particular affect the health of the employees.
There is no sure-fire way to prevent dirt and grime accumulating on industrial plant and equipment. Regular cleaning is essential to prolonging the service life of your machines and safeguarding your production. A well-tended system is not only the business card of a company and motivation for employees, but also guarantees operability and hygiene.
Important factor for machine cleaning is how to do it!!! ph-cleantec machine cleaning is based on low pressure and hot water. With the long lance it is also possible to clean at difficult to access points. The low water consumption of 1,8 l/min. ensures that the coolant balance of the machine is not affected. Cleaning also with cooling lubricants is possible. The integrated 60 l water tank makes you independent from permanent water supply. With our technology no sensitive components or gaskets are damaged as with high pressure. Stand-still times of machines are minimized.
With the raised splash-proof bath even parts can be cleaned quickly and simply on the robust grid. A special sedimentation- and filtration system makes sure, that the main dirt releases into the collector and allows to use the water for a long time. To combat really stubborn dirt and grime, a concentrated cleaning agent can be added at a precisely controlled rate, if necessary also with a corrosion protection feature. The sturdy cleaning bath (for parts up to 80 kg) can also be used for dismantling of motors, gears, etc. Supplemented by versatile spray accessories even difficult to access points or hard dirt can be optimally cleaned. A special sedimentation and filter procedure allows using the circulating water. Thus we make an important contribution to economical water consumption and the system is independent from a permanent water supply.
Lubriserv is a well established company dedicated to improving metalworking processes. With over 100 years of combined staff experience in the lubricants business, Lubriserv has proven to be a world-class supplier of metalworking lubricants, equipment and service for manufacturers.
© Copyright 2023 Lubriserv Ltd. Co. Reg. No. 03756592. Accessibility | Privacy Statement | Terms and Conditions